St. Kilian chapel – Ambo, part 3
The glue on the book ledge is dry so I pulled the clamps and brought the panels over to my oscillating spindle sander to round off the corners. That is … Continue reading
St. Kilian chapel – Ambo, part 2
With most of the base made, it is time to start on the top of the ambo. I grabbed a 9′ long piece of 4/4 oak off the pile and … Continue reading
St. Kilian chapel – Ambo, part 1
I have a new big project to get started on this week. Six new pieces of chapel furniture for Saint Kilian parish in Farmingdale, NY. I will be making a … Continue reading
Holly engagement ring box
Congratulations to my son Ian, he just got engaged to a lovely young lady today. When he bought the ring a couple of weeks ago, I offered to make a … Continue reading
Bleached walnut dining table – days 9 & 10
Before the second coat got applied, I sanded everything down again, with 400 grit paper. Then I applied a coat of General Finishes High Performance, Water-based Polyurethane. When that was … Continue reading
Bleached walnut dining table – days 6,7,&8
This three-day weekend began with cutting out more mortises. This time I was working on the top of the legs. I started removing as much material as possible with the … Continue reading
Bleached walnut dining table – days 4/5
As usual, it has been a busy week. I did manage to get the last of the urethane applied during the week, but no real progress got made until the … Continue reading
Bleached walnut dining table – day 2/3
I had hoped to get back to this table over the last week, but some times there just isn’t enough time. I did get a chance to work up the … Continue reading
Bleached walnut dining table – day 1
This new project is for a friend of mine that is on sabbatical in the United States. He and his wife want a new dining room table built for them, … Continue reading
Sword display case
I had a request to make a shadow box to display a sword. At first I thought this would be a simple task, but the more I thought about the … Continue reading
Appalachia mission trip 2019
This was my tenth year going on the Appalachia mission trip with the Saint Peter’s youth group. Our parish has been participating in the program for over 30 years now. … Continue reading
Converting maple & purpleheart crib to a bed
Remember the Maple & Purpleheart Crib that I made about three years ago? Well that little girl is not so little any more. Now that she is climbing out of … Continue reading
Floating shelf
After adding the new couch to the living room, my wife and I wanted to open up the corner of the room, where the TV is. This would give us … Continue reading
Bier build – day 3
The stain has set over night. It is not quite cured enough to apply finish, but it is dry enough that you can touch it without staining your clothes. I … Continue reading
Bier build – day 2
Time to figure out my rail attachment. I have some thumb screws with 1-1/2″ of thread. That means it I will have to attach it from the top, not … Continue reading
Bier build – day 1
I was asked to build a bier for the May procession at the National Shrine Grotto of Lourdes in Emmitsburg, MD. That gave me about two weeks to pull something … Continue reading
Kyle’s Guitar – day 6 – complete
After four coats of High-gloss Tung oil, the guitar is looking good. Time to move on to the installation of the hardware. I measured the output jack, and drilled a … Continue reading
Holy Oils case
I was given a project to do for my church, about a year ago. They requested that a box be made to transport the holy oils that are consecrated at … Continue reading
Kyle’s Guitar – day 4/5
I cut some more walnut to make a new back panel. I took care to try to match the sap wood on the front half. It won’t be a … Continue reading
Kyle’s Guitar – day 3
While the back panel was curing, I loaded the front panel into my CNC and started the carve. About 4 hours later it finished. Unfortunately the board was slightly thicker … Continue reading
Midnight Woodworking 