Midnight Woodworking

Woodworking

Tag Archives: octagonal columns

St. Kilian chapel – Tabernacle stand – part 4

I got to talk to the contractor who is laying the tile in the chapel and he gave me a final dimension for the height of the tabernacle stand. I … Continue reading →

June 18, 2020 · Leave a comment

St. Kilian chapel – Tabernacle stand – part 3

Everything sat overnight, so the glue is all dry. I pulled the clamps and started cleaning up the glue squeeze-out at the center seam of my panels. I noticed that … Continue reading →

June 10, 2020 · Leave a comment

St. Kilian chapel – Tabernacle stand – part 2

Before I get started on the base, I wanted to stain the top and see how well the grain matches. I think the solid wood and the plywood blend really … Continue reading →

June 10, 2020 · Leave a comment

St. Kilian chapel – Tabernacle stand – part 1

This next project is going to be a bit of a challenge. I live about five hours away from Saint Kilian parish and not heading to New York while it … Continue reading →

June 9, 2020 · Leave a comment

St. Kilian chapel – Credence table – part 4 & Gift table part 2

So the credence table and gift table are stained and ready for finish. Normally, I throw up my temporary spray booth and spray, covering two days worth of work in … Continue reading →

March 23, 2020 · Leave a comment

St. Kilian chapel – Credence table – part 3

Columns are trimmed and all the pieces are milled so it is time to start assembling everything. The most accurate way that I have found to attach the caps and … Continue reading →

March 22, 2020 · Leave a comment

St. Kilian chapel – Credence table – part 2

With the columns put together, I can now mill up all the rest of the column parts. Starting with the base, I cut down  some 8″ wide 6/4 oak to … Continue reading →

March 21, 2020 · Leave a comment

St. Kilian chapel – Credence table – part 1

Next piece of furniture on my “to do” list is a credence table. This table will sit next to the priest’s chair and be the same height as the arm … Continue reading →

March 19, 2020 · Leave a comment

St. Kilian chapel – Baptismal Font – part 6

I waited a day for the stain to cure, then started putting up the plastic to create my temporary spray booth. I set the column on a stool with a … Continue reading →

January 20, 2020 · Leave a comment

St. Kilian chapel – Baptismal Font – part 5

The glue is dry on the mobile base so I pulled the clamps and took it over to my router table to cut a chamfer along the top edge. Then … Continue reading →

January 18, 2020 · Leave a comment

St. Kilian chapel – Baptismal Font – part 4

I pulled the clamps on the two base plates that I glued up the other night. Since they are too wide to run through my planer, I sent them through … Continue reading →

January 17, 2020 · Leave a comment

St. Kilian chapel – Baptismal Font – part 3

I was getting ready to mill some more wood for the column cap piece when I noticed the off-cuts from the mid-plate. It wouldn’t take much to make an octagon … Continue reading →

January 14, 2020 · 1 Comment

St. Kilian chapel – Baptismal Font – part 2

I pulled the clamps on the big plate with a hole in it (I gave up trying to find a name for each of these pieces…), then I centered it … Continue reading →

January 11, 2020 · Leave a comment

St. Kilian chapel – Baptismal Font – part 1

I hope everyone had a nice Christmas and a happy New Year. Mine was pretty good, I found out that I am going to be a grandfather. I also took … Continue reading →

January 6, 2020 · Leave a comment

St. Kilian chapel – Deacon’s chair – part 2

The stain is dry so it is time to set up my temporary spray booth. This is basically a drop cloth and a large piece of plastic clamped to the … Continue reading →

December 29, 2019 · Leave a comment

St. Kilian chapel – Deacon’s chair – part 1

I am heading up to New York, next week, to deliver the chair and the ambo. I got an additional request for a Deacon’s chair to go with the Pastor’s … Continue reading →

December 27, 2019 · Leave a comment

St. Kilian chapel – Pastor chair, part 4

Before I can fully assemble the chair, I need to cut the plywood panels for the seat and back. Unfortunately, at the moment, the only place I have to store … Continue reading →

December 14, 2019 · 1 Comment

St. Kilian chapel – Pastor chair, part 3

With just about all the parts cut out, it was time to start sanding. I took everything down to 180 grit in preparation for glueing up the legs. To attach … Continue reading →

December 9, 2019 · Leave a comment

St. Kilian chapel – Pastor chair, part 2

I decided to sand the four columns before adding the trim. Like the Ambo, the columns on the chair will have a walnut bullnose wrapped around the top and bottom … Continue reading →

December 7, 2019 · Leave a comment

St. Kilian chapel – Pastor chair, part 1

The next piece that I am working on for the Saint Kilian chapel is the Pastor chair. It will have similar octagonal columns to the ambo. This is my design: chair-PARTS.pdf. … Continue reading →

December 2, 2019 · Leave a comment

Number of visitors

  • 373,257 hits

Follow Blog via Email

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 196 other subscribers

Browse by catagory

Browse my archive