St. Kilian chapel – Ambry – part 4
Stain is dry so I set up the spray booth and got prepped for finish. I set up my knock-down workbench to hold everything and put it all up on … Continue reading
St. Kilian chapel – Ambry – part 3
To fit the door into place, I first had to measure the width of the piano hinge, then subtract a bit more to allow the door a bit of room … Continue reading
St. Kilian chapel – Ambry – part 2
I started today with pulling clamps and sanding all the glass panels. With the top piece done, I can trace it to get an exact match for the bottom. I … Continue reading
Maple & Purpleheart crib – delivered
Crib is finished and the family is back home, so I packed up everything in my wife’s car and brought it over. Patrick helped me unload and set up. I … Continue reading
Maple & Purpleheart crib – day 12
I let the first coat of water-based poly cure over night. Before I can spray on the second coat, I need to sand everything down with 400 grit sand paper. … Continue reading
Maple & Purpleheart crib – day 11
The hard maple feet that I ordered, arrived yesterday, so I can start wrapping this project up. Good thing too, Momma just went into labor today. Please say a little … Continue reading
Maple & Purpleheart crib – day 10
I set up my knock-down workstation, then assembled the sides and clamped the whole crib together. Remember the sides were not glued up yet. That was so I could locate the … Continue reading
Maple & Purpleheart crib – day 9
Happy Easter everybody. I am spending most of the day with the family, but I wanted to get a bit of glueing done. Mainly, I want to attach the sides … Continue reading
Maple & Purpleheart crib – day 8
I need to cut out a cross for the headboard. The one that was picked out is very detailed, so I modeled it up and created a program for my … Continue reading
Maple & Purpleheart crib – day 7
I ran the lower arch on my CNC yesterday. It looked really good when it came out. I laid the purpleheart pieces on it to verify that the curves matched … Continue reading
Maple & Purpleheart crib – day 6
I think I have worked out a functional plan for the back. BACK.PDF. The curvy parts were the hard bit to work out. The main back will be a … Continue reading
Maple & Purpleheart crib – day 5
Before I can finish up with the sides, I need to locate and mount some hardware. I decided to buy a mattress spring frame, as opposed to building a frame, … Continue reading
Maple & Purpleheart crib – day 4
Busy day today, but I still found 6 or 7 hours to play in the shop. With the frame done, I went ahead and cut the top and bottom … Continue reading
Maple & Purpleheart crib – day 3
I have had a few hours over the last two evenings to get started on the sides of the crib. I haven’t had much time to put a lot of … Continue reading
Maple & Purpleheart crib – day 2
I racked my brains last night, trying to come up with a clever way to repeat the spacing for the slots. Then I realized that it wasn’t necessary. If I … Continue reading
Midnight Woodworking 