St. Kilian chapel – 911 memorial
This project has been in the works for a full year. I usually prefer to get a project designed and completed fairly quickly but this one was unique. Saint Kilian … Continue reading
Church Altar and tabernacle stand – day 11
I pulled the clamps off of the tabernacle stand top today. Learning from the altar top, I only use the router to flush trim the end grain. for some reason … Continue reading
Church Altar and tabernacle stand – day 10
Finally made a bit of progress today. I finished op on the top for now and was able to get most of the veneer done on the bottom and the … Continue reading
Church Altar and tabernacle stand – day 9
Almost done the top surface of this thing. I pulled the clamps to see how the inlays turned out. Not bad, a little glue squeeze-out here and there, and some … Continue reading
Church Altar and tabernacle stand – day 7
I had a few hours to work on the altar, so I pulled the clamps off of yesterday’s work and started sanding down the top. I set up one of … Continue reading
Church Altar and tabernacle stand – day 6
Well, I didn’t have much time to work last night, but I did pull the clamps to see how the repair on the veneer worked. Surprisingly some of my painter’s … Continue reading
Church Altar and tabernacle stand – day 5
I started out today with planing down a piece of walnut to 1/8″ thick. This piece will be for the cross that will be inlaid on the door I just … Continue reading
Church Altar and tabernacle stand – day 4
Long day today. We spent the day getting my oldest moved in to his college dorm room. By the time we got home and ate dinner, I only had a … Continue reading
Midnight Woodworking 