Midnight Woodworking

Woodworking

Tag Archives: church altar

Church Altar and tabernacle stand – day 10

Finally made a bit of progress today. I finished op on the top for now and was able to get most of the veneer done on the bottom and the … Continue reading

September 1, 2013 · Leave a comment

Church Altar and tabernacle stand – day 9

Almost done the top surface of this thing. I pulled the clamps to see how the inlays turned out. Not bad, a little glue squeeze-out here and there, and some … Continue reading

August 29, 2013 · Leave a comment

Church Altar and tabernacle stand – day 8

I had an hour or two last night to play, so I decided to get the crosses inlaid on the altar top. Before I did that, wanted to see how … Continue reading

August 29, 2013 · 2 Comments

Church Altar and tabernacle stand – day 7

I had a few hours to work on the altar, so I pulled the clamps off of yesterday’s work and started sanding down the top. I set up one of … Continue reading

August 28, 2013 · 1 Comment

Church Altar and tabernacle stand – day 6

Well, I didn’t have much time to work last night, but I did pull the clamps to see how the repair on the veneer worked. Surprisingly some of my painter’s … Continue reading

August 27, 2013 · Leave a comment

Church Altar and tabernacle stand – day 5

I started out today with planing down a piece of walnut to 1/8″ thick. This piece will be for the cross that will be inlaid on the door I just … Continue reading

August 26, 2013 · Leave a comment

Church Altar and tabernacle stand – day 4

Long day today. We spent the day getting my oldest moved in to his college dorm room. By the time we got home and ate dinner, I only had a … Continue reading

August 24, 2013 · Leave a comment

Church Altar and tabernacle stand – day 3

It has been a busy week so far, but I was able to get all of my wood for the project. The majority of the wood was donated by Alex … Continue reading

August 22, 2013 · Leave a comment

Church Altar and tabernacle stand – day 2

Before I can assemble the top, I had a couple of filler pieces that need to be made for the back side. I left them out so I could squeeze … Continue reading

August 18, 2013 · Leave a comment

Church Altar and tabernacle stand – day 1

I am starting on two new projects this week. This will be the new altar and tabernacle stand for the daily mass chapel at Saint Peter’s in Libertytown, MD. Here … Continue reading

August 18, 2013 · Leave a comment

Number of visitors

  • 229,469 hits

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 171 other followers

Browse by catagory

Browse my archive