Extracting a broken screw
When I made my bass guitar last week, I ran into some trouble installing the pickups. Maple and purpleheart are very dense woods, and the long, skinny screws for mounting … Continue reading
Purpleheart & maple bass guitar – day 7 complete
I had a little more time this evening, so I wired up the controls and closed it up. I added the control knobs and wired it up. Adam … Continue reading
Purpleheart & maple bass guitar – day 6
I got up bright and early yesterday to put the sixth and final coat of Tung oil onto the guitar body, before I went to work. After each coat, I … Continue reading
Ed’s pen kits
My friend Ed saw my Penn State Industries catalog sitting on my desk and started leafing through it at work one day. He was surprised by the large variety of … Continue reading
Purpleheart & maple bass guitar – day 5
The dye is dry, so I got up bright and early this morning to get the first coat of finish on. The dye is water based, so the grain got … Continue reading
Purpleheart & maple bass guitar – day 4
I intend to make a lot of saw dust today, so I moved my small work bench outside and clamped my guitar body to it. I put a 40 grit … Continue reading
Purpleheart & maple bass guitar – day 3
Today I am working on the back panel. Since I try to learn new techniques with every project, I am going to attempt to re-use the piece that I cut … Continue reading
Purpleheart & maple bass guitar – day 2
My last couple of weekends have been busy with graduations, so I haven’t been able to work on the bass guitar at all. I decided to blow off work today … Continue reading
Park bench slats – delivered and installed
A few weeks ago, I made a set of park bench slats for a very nice lady, Lena, in Southern Florida. She sent me some pictures, of the state her park … Continue reading
Purpleheart & maple bass guitar – day 1
My friend Rick gave me a bass guitar neck. Now that I have the neck, I have to build a body to go with it… I did some searching on … Continue reading
Porsche emblem carve
My friend Nick is a Porsche fan. He asked if I could carve a large Porsche logo, in wood for him. I found this image and used it as a … Continue reading
Welcome sign
I have not had any big projects lately. Nothing instructive to post anyway. I did recently do a quick project for my friend Dave that I thought I would post. … Continue reading
Midnight Woodworking 