Lectern Day 5 – Delivered
Before applying the second coat of polyurethane, I have to sand down the first coat with 400 grit paper to smooth out the surface. Even though this thing was inside … Continue reading
Lectern Day 4
The column is complete so it is time to make the top part. I joined up two pieces, to make the bottom, and left them to dry. I laid out … Continue reading
Oak storage cabinet – day 12
Ok, last day to spray. I have two coats applied to the shelves and sides. They look really good, but I am going to apply a third coat anyway. An … Continue reading
Oak storage cabinet – day 11
I determined that all of the pieces, that I have been spraying, are acceptable. I spent some time Jockeying everything around, moving all of my finished pieces out to the … Continue reading
Oak storage cabinet – day 10
My shop is basically useless while I am finishing the cabinet, so I haven’t been doing much. I let the first coat set for a day to cure, and sanded … Continue reading
Oak storage cabinet – day 9
I let the doors set clamped up overnight, to ensure that the glue dried completely. When I pulled the clamps off today, the doors looked a lot straighter than they … Continue reading
Midnight Woodworking 