Day 8 – Sacristy cabinet
Things started out well today. I got the drawer slides installed fairly quickly using my new drawer mounting jig from Kerg. Then things went downhill from there… Once the slides … Continue reading
Day 7 – Sacristy cabinet
I started out by cutting out the door panel for the locked storage area. Luckily I had the foresight to cut the bottom of the door before glueing it up. … Continue reading
Day 6 – Sacristy cabinet
Finally starting to make some real progress. I finished cutting the dados in the front and rear boards for the drawers. They were then assembled with glue and nails. Then … Continue reading
Day 5 – Sacristy cabinet
Blew off work today to stay home and play in the shop. I finished planing and cutting the raised panel profile on the drawer faces. I also cut the notched … Continue reading
Day 4 – Sacristy cabinet
Finished up planing the glue joints on the big boards. Took a few hours so not many pictures today 🙂
Day 3 – Sacristy cabinet
I only had a couple hours to play today. I finished cutting all the pieces down to the correct width and started the fun job of cleaning up all of … Continue reading
Day 2 – Sacristy cabinet
Today I finished glueing the side panels as well as the top and the shelves. The ambo panels will be separated by 10-1/2″ tall and 1/4″ thick dividers. I only … Continue reading
Day 1 – Sacristy cabinet
I was asked to build a cabinet that would hold all of the altar cloths for our church. This is day one. Plans are attached to this page for anyone … Continue reading
Midnight Woodworking 