Midnight Woodworking

Woodworking

Tag Archives: Walnut countertop

Walnut counter – day 6 – installed

After the first coat of urethane had cured, I had Erin sand down everything with 400 grit paper. Then she proceeded to apply the second coat. Over the next day … Continue reading →

December 5, 2016 · 1 Comment

Walnut counter – day 5

The epoxy cured over night, now it is time to start sanding. Erin started with 80 grit paper to remove the bulk of the excess epoxy, then stepped down to … Continue reading →

December 1, 2016 · Leave a comment

Walnut counter – day 4

Erin hasn’t been available, to work on the counter for a little while. She has been busy prepping the wall, in her house, for the installation. Her house is over … Continue reading →

November 29, 2016 · Leave a comment

Walnut counter – day 3

Erin came over for a few hours yesterday, so we got back to work on the corbels. I had a nice thick piece of white oak that we are going … Continue reading →

November 9, 2016 · Leave a comment

Walnut counter – day 2

I got a little prep work done before Erin came over today. I will require some thicker oak for the supports, so I cut some quarter-sawn red oak boards. After … Continue reading →

November 1, 2016 · Leave a comment

Walnut counter – day 1

When we installed the fireplace bar at Erin’s house, we determined that the dining room table just completely disrupted the flow of the room, as well as blocked the view … Continue reading →

October 24, 2016 · Leave a comment

Number of visitors

  • 373,160 hits

Follow Blog via Email

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 196 other subscribers

Browse by catagory

Browse my archive