Built-in beds – part 6
Before I start assembling anything, I need to address the stopped dados that I cut with the table saw. I need square corners for the plywood to fit into and … Continue reading
Built-in beds – part 5
Bed delivery was less than fun because each bed weighed about 140 lbs. Getting the first couple in the truck was easy with two people, but the last two required … Continue reading
Built-in beds – part 4
I didn’t receive the paint until after the beds were mostly assembled so I made sure that all of the face frames were still removable while I was gluing in … Continue reading
Built-in beds – part 3
I assembled the rest of the face frames. I thought I had a problem with the first face frame for the two beds that only have two drawers. On these … Continue reading
Built-in beds – part 2
To assemble the drawers, I apply glue to the ends of the 3/4″ plywood that will be my side pieces. I use a clamping block in the corner to hold … Continue reading
Built-in beds – part 1
I have a couple of friends that are getting ready to move into their new house. It is currently in the final phase of construction and they want to move … Continue reading