Another 72 thinline telecaster – day 3
I was getting ready to glue up the two halves of the guitar when I noticed a small problem. The pilot holes for the neck screws were off on the … Continue reading
Another 72 thinline telecaster – day 2
The second half finished its run in the carver. I flipped it over and cut away the tabs. With both halves freed up, I assembled them in a dry-fit … Continue reading
Another 72 thinline telecaster – day 1
I built a 72 thinline telecaster a few months back, and I have had a request for another one. The first one was made for a friend of mine and … Continue reading
72 thinline telecaster guitar carve – day 3
The glue has dried, so I pulled the clamps. I set the larger spindle up in the spindle sander and sanded all of the larger curves. I stepped sown to … Continue reading
72 thinline telecaster guitar carve – day 2
Spent the day packing my oldest up and taking him back to college. I did squeeze in a bit of time to get back to the guitar body, that I … Continue reading
72 thinline telecaster guitar carve
I had a request for another guitar body. This one is a little different from the solid body guitars that I have built before. This guitar body is modeled after … Continue reading