Kyle’s Guitar – day 6 – complete
After four coats of High-gloss Tung oil, the guitar is looking good. Time to move on to the installation of the hardware. I measured the output jack, and drilled a … Continue reading
April 5, 2019 · Leave a comment
Kyle’s Guitar – day 4/5
I cut some more walnut to make a new back panel. I took care to try to match the sap wood on the front half. It won’t be a … Continue reading
March 24, 2019 · Leave a comment
Kyle’s Guitar – day 3
While the back panel was curing, I loaded the front panel into my CNC and started the carve. About 4 hours later it finished. Unfortunately the board was slightly thicker … Continue reading
March 19, 2019 · Leave a comment
Midnight Woodworking 