Guestbook stands & lectern for Holy Spirit Church – part 3
While the stain was drying on the guestbook stands, I started marking the legs for the lectern. I need a couple of stopped dados on the legs for the tenons … Continue reading
Guestbook stands & lectern for Holy Spirit Church – part 2
I sanded all of the joined edges of the guestbook stand tops so that all of the faces were flush and smooth. There were slight elevation differences between the front … Continue reading
Guestbook stands & lectern for Holy Spirit Church – part 1
I have a couple more interesting projects for Holy Spirit Church. The first is two Guestbook stands and the second is a lightweight lectern. These all need to be moved … Continue reading
Portable podium for Holy Spirit church – part 5
The stain has dried overnight so I can start my day by cramming all the podium parts into my spray booth. I am using Minwax semi-gloss polyurethane. It is an … Continue reading
Portable podium for Holy Spirit church – part 4
The brackets for attaching the tops are dry so I pulled the clamps off and sanded away any glue squeeze-out. Since there is a 10° angle on the top of … Continue reading
Portable podium for Holy Spirit church – part 3
Got all day to work today so I got started with sanding the top assemblies. Once all of the faces were smooth and flush, I used a hand sander to … Continue reading
Portable podium for Holy Spirit church – part 2
Before cutting down the larger panels, I decided to clean up my off-cuts and make the small pieces for the top and base. I cut all the 2-1/2″ wide pieces … Continue reading
Portable podium for Holy Spirit church – part 1
I have another interesting project for Holy Spirit Church. This project is for their school. They want three portable podiums with internal shelving and a laptop shelf on the side. … Continue reading
Midnight Woodworking 