Ironing board storage cabinet – day 11

Just a quick post today. The polyurethane has dried from last night so I gave the door panel and the cabinet a quick sanding with fine steel wool to take down the dust nibs and any other rough spots. I then applied a second coat of the wipe-on-poly to the inside and brushed a coat of poly on the outside as well. Hopefully this will cure today and I can apply the door hardware tomorrow. The wipe-on poly is a little thinner than the stuff I am putting on the outside, so I may need another coat. We will see.

Sanding the door with steel wool

Sanding the cabinet with steel wool

Brushing Urethane on the outside

Second coat applied