Small walnut table for Holy Spirit Church
Holy spirit church requested another table. This one is for Lent. It will be similar to the last table I made for them it style, but it will be smaller … Continue reading
Tapered leg table for Holy Spirit Church
I just delivered several different tables to Holy Spirit church in this style and they requested one more. This one is slightly different. This one is a little deeper and … Continue reading
Credence tables for Holy Spirit Church – part 5
The final coat of polyurethane is dry on the tops, so I can peel off the masking and do my final assembly. With the lower section of the table already … Continue reading
Credence tables for Holy Spirit Church – part 4
To cut the bullnose trim for the shelf and top, I have a couple of options. I can cut the full bullnose in one pass with the bullnose bit or … Continue reading
Credence tables for Holy Spirit Church – part 3
With the legs done and set aside for now, I can move on to the table tops and shelves. I have a large pile of quarter-sawn oak to start with … Continue reading
Credence tables for Holy Spirit Church – part 2
Before cutting the tapers on all of the longer legs, I need to drill the dowel hole in the bottom of the leg. I press the drill jig into place … Continue reading
Credence tables for Holy Spirit Church – part 1
My next project for Holy Spirit church is a series of tables. They will all be modeled in part around the design of this existing credence table (see image below). … Continue reading